Solumer 8705L
Solumer™ 8705L performs well across a wide range of general-purpose thermoplastic elastomer applications and features excellent flow properties.
Applications
General-purpose thermoplastic elastomer
Impact modification
Wire and cable
Footwear
| Property | Test Method | Unit | Value |
|---|---|---|---|
| Density | ASTM D792 | g/cm³ | 0.868 |
| Melt Flow Rate (190°C, 2.16kg) | ASTM D1238 | g/10min | 0.5 |
Where Solumer 8705L fits
Solumer 8705L has a typical density of 0.868 g/cm³ and a melt flow rate of 0.5 g/10 min (190 °C/2.16 kg), which makes it a soft, low-flow grade in the SK SOLUMER range. Grades in this window are typically used for:
- Impact modification of PP and TPO compounds, especially for low-temperature toughness
- Extruded profiles, hoses, and wire and cable compounds
- Foams and soft compounds where melt strength matters
Similar grades from other producers
These grades share the same nominal density (0.868 g/cm³) and melt flow (0.5 g/10 min): ENGAGE™ 8150, ENGAGE™ 8157, Exact™ 5061, Lucene LC161, FORTIFY™ C05075DF, FORTIFY™ C0570D, Queo 6800LA and WANSUPER 5007. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of Solumer 8705L comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all SK SOLUMER POE grades or the full POE range, and send us your application for a quotation.
