WANSUPER 5017 POE
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.870 | g/cm³ | ASTM D792 |
| Melt Flow Index (2.16 kg @ 190°C) | 1 | g/10 min | ASTM D1238 |
| Tensile Strength at Break (500 mm/min) | 10 | MPa | ASTM D638 |
| Elongation at Break (500 mm/min) | 950 | % | ASTM D638 |
| Tear Strength (Type C) | 39 | kN/m | ASTM D624 |
| Melting Temperature | 65 | °C | Wanhua Method |
| Glass Transition Temperature | -53 | °C | Wanhua Method |
Where WANSUPER 5017 fits
WANSUPER 5017 has a typical density of 0.870 g/cm³ and a melt flow rate of 1 g/10 min (190 °C/2.16 kg), which makes it a soft, low-flow grade in the WANSUPER range. Grades in this window are typically used for:
- Impact modification of PP and TPO compounds, especially for low-temperature toughness
- Extruded profiles, hoses, and wire and cable compounds
- Foams and soft compounds where melt strength matters
Similar grades from other producers
These grades share the same nominal density (0.870 g/cm³) and melt flow (1 g/10 min): ENGAGE™ 8100 and ENGAGE™ 8107. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of WANSUPER 5017 comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all WANSUPER POE grades or the full POE range, and send us your application for a quotation.
