SABIC FORTIFY™ C13060 POE
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Mechanical Properties | |||
| Tensile Properties | |||
| Tensile Strength at Break | 3.1 | MPa | ASTM D638 |
| Elongation at Break | > 1000 | % | ASTM D638 |
| 100% Modulus | 1.8 | MPa | ASTM D638 |
| Durometer Hardness | |||
| Shore A (1 sec) | 63 | – | ASTM D2240 |
| Shore D (1 sec) | 16 | – | ASTM D2240 |
| Flexural Modulus (1% Strain) | 7.5 | MPa | ASTM D790 |
| Tear Strength (Type C) | 25.5 | kN/m | ASTM D624 |
| Polymer Properties | |||
| Density | 863 | kg/m³ | ASTM D792 |
| Melt Flow Rate (MFR) | |||
| At 190°C and 2.16 kg | 13.0 | g/10 min | ASTM D1238 |
| At 230°C and 2.16 kg | 27.0 | g/10 min | ASTM D1238 |
| Mooney Viscosity | |||
| ML1+4, 121°C | 3 | MU | ASTM D1646 |
| Thermal Properties | </td |
Where FORTIFY™ C13060 fits
FORTIFY™ C13060 has a typical density of 0.863 g/cm³ and a melt flow rate of 13 g/10 min (190 °C/2.16 kg), which makes it a soft, high-flow grade in the SABIC FORTIFY range. Grades in this window are typically used for:
- High-flow TPO compounds for thin-wall injection moulding
- Polymer modification where fast mould filling matters
- Soft, easy-flowing compounds for large or complex parts
Similar grades from other producers
These grades share the same nominal density (0.863 g/cm³) and melt flow (13 g/10 min): Solumer 8613L. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of FORTIFY™ C13060 comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all SABIC FORTIFY POE grades or the full POE range, and send us your application for a quotation.
