Lucene LF575
Applications
- Photovoltaic encapsulation material PVEN.
| Property | Test Method | Unit | Value |
|---|---|---|---|
| Density | ASTM D1505 | g/cm3 | 0.877 |
| Melt Flow Rate (190°C, 2.16 kg) | ASTM D1238 | g/10 min | 5 |
Where Lucene LF575 fits
Lucene LF575 has a typical density of 0.877 g/cm³ and a melt flow rate of 5 g/10 min (190 °C/2.16 kg), which makes it a semi-rigid, medium-flow grade in the LG Lucene range. Grades in this window are typically used for:
- Photovoltaic (PV) encapsulant film for solar modules
- Film extrusion where low moisture uptake and high volume resistivity are needed
- Formulations compounded with a crosslinking agent, a silane coupling agent and UV stabilizers
Documents and samples
Every shipment of Lucene LF575 comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all LG Lucene POE grades or the full POE range, and send us your application for a quotation.
