SABIC FORTIFY™ C5070 POE
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Mechanical Properties | |||
| Tensile Properties | |||
| Tensile Strength at Break | 6 | MPa | ASTM D638 |
| Elongation at Break | 1100 | % | ASTM D638 |
| 100% Modulus | 2.3 | MPa | ASTM D638 |
| Durometer Hardness | |||
| Shore A (1 sec) | 63 | – | ASTM D2240 |
| Shore D (1 sec) | 16 | – | ASTM D2240 |
| Flexural Modulus (1% Strain) | 10.8 | MPa | ASTM D790 |
| Tear Strength (Type C) | 35.3 | kN/m | ASTM D624 |
| Polymer Properties | |||
| Density | 868 | kg/m³ | ASTM D792 |
| Melt Flow Rate (MFR) | |||
| At 190°C and 2.16 kg | 5.0 | g/10 min | ASTM D1238 |
| At 230°C and 2.16 kg | 11.0 | g/10 min | ASTM D1238 |
| Mooney Viscosity | |||
| ML1+4, 121°C | 8 | MU | ASTM D1646 |
| Thermal Properties | |||
| Peak Melting Temperature | 62 | °C | Sabic Industrial Method |
| Glass Transition Temperature, Tg | -52 | °C | Sabic Industrial Method |
Where FORTIFY™ C5070 fits
FORTIFY™ C5070 has a typical density of 0.868 g/cm³ and a melt flow rate of 5 g/10 min (190 °C/2.16 kg), which makes it a soft, medium-flow grade in the SABIC FORTIFY range. Grades in this window are typically used for:
- General-purpose PP and TPO impact modification
- Injection-moulded soft-touch and flexible parts
- Wire and cable compounds and footwear foams
Similar grades from other producers
These grades share the same nominal density (0.868 g/cm³) and melt flow (5 g/10 min): Exact™ 5371 and Solumer 875L. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of FORTIFY™ C5070 comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all SABIC FORTIFY POE grades or the full POE range, and send us your application for a quotation.
