Queo 7001LA
Queo™ 7001LA is an ethylene-octene-1 elastomer produced via solution polymerization using metallocene catalysts.
| Property | Typical Value | Test Method |
|---|---|---|
| Density | 0.870 g/cm³ | ASTM D792 |
| Melt Flow Index (190°C / 2.16 kg) | 0.5 g/10min | ASTM D1238 |
Where Queo 7001LA fits
Queo 7001LA has a typical density of 0.870 g/cm³ and a melt flow rate of 0.5 g/10 min (190 °C/2.16 kg), which makes it a soft, low-flow grade in the Borealis Queo range. Grades in this window are typically used for:
- Impact modification of PP and TPO compounds, especially for low-temperature toughness
- Extruded profiles, hoses, and wire and cable compounds
- Foams and soft compounds where melt strength matters
Similar grades from other producers
These grades share the same nominal density (0.870 g/cm³) and melt flow (0.5 g/10 min): ENGAGE™ 7387, ENGAGE™ HM 7387 and Exact™ 9071. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of Queo 7001LA comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all Borealis Queo POE grades or the full POE range, and send us your application for a quotation.
