SABIC FORTIFY™ C11075DF POE
FORTIFY™ Polyolefin Elastomer (POE) C11075DF is a commonly used grade in foam applications. This grade is designed as a low-density, high-performance copolymer modifier to provide outstanding elasticity and compression set performance.
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Polymer Properties | |||
| Density | 868 | kg/m³ | ASTM D1505 |
| Melt Flow Rate (MFR) | |||
| At 230°C / 2.16 kg | 2 | g/10 min | ASTM D1238 |
| At 190°C and 2.16 kg | 1 | g/10 min | ASTM D1238 |
| Mechanical Properties | |||
| Durometer Hardness | |||
| Shore A (1 sec) | 71 | – | ASTM D1238 |
| Shore D (1 sec) | 21 | – | ASTM D1238 |
| Flexural Modulus (1% Strain) | 13 | MPa | ASTM D790 |
| Tear Strength (Type C) | 39 | kN/m | ASTM D624 |
| Thermal Properties | |||
| Peak Melting Temperature | 62 | °C | Sabic Industrial Method |
| Glass Transition Temperature, Tg | -52 | °C | Sabic Industrial Method |
Where FORTIFY™ C11075DF fits
FORTIFY™ C11075DF has a typical density of 0.868 g/cm³ and a melt flow rate of 1 g/10 min (190 °C/2.16 kg), which makes it a soft, low-flow grade in the SABIC FORTIFY range. Grades in this window are typically used for:
- Impact modification of PP and TPO compounds, especially for low-temperature toughness
- Extruded profiles, hoses, and wire and cable compounds
- Foams and soft compounds where melt strength matters
Similar grades from other producers
These grades share the same nominal density (0.868 g/cm³) and melt flow (1 g/10 min): Exact™ 5171, Solumer 871 and Solumer 871L. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of FORTIFY™ C11075DF comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all SABIC FORTIFY POE grades or the full POE range, and send us your application for a quotation.
