ENGAGE™ 7387
ENGAGE™ 7387 is an ethylene-butene copolymer that, compared to other commercially available polyolefin elastomers, offers higher molecular weight, better toughness, and higher melt strength. It is well-suited for wire and cable extrusion applications and can also be used for impact modification of various thermoplastic resins.
| Property | Typical Value | Test Method |
|---|---|---|
| Density | 0.870 g/cm³ | ASTM D792 |
| Melt Flow Index (190°C / 2.16 kg) | 0.5 g/10 min | ASTM D1238 |
Where ENGAGE™ 7387 fits
ENGAGE™ 7387 has a typical density of 0.870 g/cm³ and a melt flow rate of 0.5 g/10 min (190 °C/2.16 kg), which makes it a soft, low-flow grade in the Dow ENGAGE range. Grades in this window are typically used for:
- Impact modification of PP and TPO compounds, especially for low-temperature toughness
- Extruded profiles, hoses, and wire and cable compounds
- Foams and soft compounds where melt strength matters
Similar grades from other producers
These grades share the same nominal density (0.870 g/cm³) and melt flow (0.5 g/10 min): Exact™ 9071 and Queo 7001LA. Comonomer, molecular-weight distribution and additive package still differ, so confirm with a short trial before you switch.
Documents and samples
Every shipment of ENGAGE™ 7387 comes with a TDS and COA; an SDS is available on request, and for applicable grades we can provide the producer’s REACH and RoHS declarations. Samples are available for qualification trials. Compare all Dow ENGAGE POE grades or the full POE range, and send us your application for a quotation.
